You have no items in your shopping cart.

Subtotal: $0.00

DJI Matrice 600 Hexacopter

More Views

DJI Matrice 600 Hexacopter

Be the first to review this product

Availability: In stock

$3,219.00


PRODUCT HIGHLIGHTS:



- Works with Zenmuse Gimbals / Cameras
- Works with Ronin-MX Gimbal
- Up to 33 Pound Total Take-Off Weight
- Integrated Lightbridge 2 Support
- Full HD 1080p Live Monitoring
- DJI A3 Flight Control System
- Controllable with DJI Go App
- Retractable Landing Gear
- Collapsible Design for Easy Transport
- Powers from Six Flight Batteries

Details

Supporting a total takeoff weight of 33.2 pounds, the Matrice 600 (M600) is a hexacopter from DJI designed for professional video and industrial imaging applications. It is centered around DJI's advanced A3 flight control system and incorporates the Lightbridge 2 system for HD resolution, low-latency monitoring via SDI, HDMI, and USB outputs on the controller. For camera support, the M600 works with Zenmuse Z15 series gimbals, the Ronin-MX gimbal, and Zenmuse X Series gimbal/camera hybrids.

The M600 comes almost-ready-to-fly (ATF), including controller (transmitter), flight batteries, charger, flight controller, and sundries. Additional hardware needed may include a gimbal, camera, as well as any flight controller add-ons. Some assembly is required.

Performance

Intelligent Drive System
The M600 uses sine-wave driven, intelligent ESCs to ensure it performs accurately, safely, and efficiently, while the A3 flight controller's self-adaptive systems adjust flight parameters automatically based on different payloads

Air System Design

Modular Design
The modular design makes the Matrice 600 easy to set up and ready to use
Gimbal Compatibility
All Zenmuse cameras and gimbals are natively compatible, and a maximum payload of 13.2 lb allows it to fly the Ronin-MX gimbal and a range of cameras, from Micro Four Thirds systems to the RED EPIC
Built to Last
A dust-proof propulsion system simplifies maintenance, while actively cooled motors make for reliable operation for extended periods of time

A3 Flight Controller

GNSS-based A3 acts as the brains of the aircraft. Using data from the GPS, compass, and various sensors, it provides navigation a stabilization with varying degrees of autopilot redundancy, depending on user settings. An array of expansion ports allows you to connect optional DJI and third-party equipment
DJI GO App for iOS and Android
The M600 supports the DJI GO app as well as the DJI Assistant 2. Get a live HD view, battery status, redundancy status, transmission strength and much more, straight from the DJI GO app. DJI GO is also the control center for the camera, giving access to shutter speed, ISO, photo or video capture on any Zenmuse X series camera and remote focus and aperture on the Zenmuse X5 and X5R cameras. The DJI Assistant 2 supports firmware updates and the new Ground Station, and comes with a built-in flight simulator
Extended Range
The Matrice 600's radio range extents to 3.1 miles with a clean signal
A3 Pro Upgrade
The separately available A3 Pro upgrade brings triple redundancy to the Matrice 600's flight controller. It features diagnostic algorithms that compare sensor data from the three sets of units in real-time, helping ensure the aircraft flies as expected, especially important in professional filmmaking and industrial environments
D-RTK GNSS Upgrade
The A3 GNSS system can be upgraded with separately available Real-Time Kinematic technology (RTK) for even greater navigational accuracy. Using dual antennas, RTK provides greater precision than a compass and is not susceptible to magnetic interference from metal structures

Lightbridge 2

Professional HD Transmission
DJI Lightbridge 2 has been designed from the ground up to meet the requirements of professional broadcasting, offering high frame rates and HD live streaming. USB, mini-HDMI, and 3G-SDI ports on the controller support video output at up to 1080p/60 fps or a broadcast standard output of 720p/59.94 fps and 1080i/50 fps

DJI SDK

The M600 is fully compatible with the DJI Onboard SDK and Mobile SDK to meet the requirements of those building software for industrial applications. It has a dual parallel CAN and API ports for connecting DJI devices, including the Guidance sensor system, the RTK GNSS units, or third party components of your choice

 

Specification:

Performance

 
Maximum Speed Horizontal (No Wind): 59.1 ft/s / (18 m/s)
Ascent: 16.4 ft/s (5 m/s)
Descent: 9.8 ft/s (3 m/s)
Maximum Wind Resistance 26.2 ft/s (8 m/s)
Maximum Altitude Above Sea Level: 8202.1' / 2500 m
Hovering Accuracy P-Mode with GPS:
Vertical: ±1.6' / 0.5 m
Horizontal: ±4.9' / 1.5 m
Maximum Angular Velocity Pitch: 300°/s
Yaw: 150°/s
Maximum Pitch Angle 25°
Hovering Time Six TB47S Batteries:
No payload: 35 minutes
13.2 lb / 6 kg Payload: 16 minutes

Six TB48S Batteries:
No payload: 40 minutes
12.1 lb / 5.5 kg payload: 18 minutes

Note: Hovering time is based on flying at 32.8' / 10 m above sea level in a no-wind environment and landing with 10% battery level.
Takeoff Weight Up to 33.2 lb / 15.1 kg
Flight Control System
Model A3
Transmitter
Frequency 5.725 to 5.825 GHz
2.400 to 2.483 GHz
Communication Distance 3.1 miles / 5 km
Transmitter Power 13 dBm at 5.8 G
20 dBm at 2.4 G
Connectivity 1 x HDMI
1 x SDI
1 x USB
Dual User Capability Master-and-slave control
Output Power 9 W
Operating Temperature 14 to 104°F / -10 to 40°C
Battery Type: Built-in
Chemistry: Lithium-ion polymer (LiPo)
Capacity: 6000 mAh
Configuration: 2S
Storage Temperature < 3 Months: -4 to 113°F / -20 to 45°C
> 3 Months: 72 to 82°F / 22 to 28°C
Charging Temperature 32 to 104°F / 0 to 40°C
Mobile Device Holder Supports smartphones and tablets
Maximum Tablet Width: 6.7" / 170 mm
Gimbal
Supported Gimbals Zenmuse X Series: X3, X5 & X5R, XT
Ronin Series: Ronin-MX
Z15 HD Series: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4
Flight Battery
Model TB47S
Chemistry Lithium-ion polymer (LiPo)
Capacity 4500 mAh
99.9 Wh
Configuration 6S
Weight 1.3 lb / 595 g
Maximum Charging Power 180 W
Operating Temperature 14 to 104°F / -10 to 40°C
Charging Temperature 41 to 104°F / 5 to 40°C
Storage Temperature < 3 Months: -4 to 113°F / -20 to 45°C
> 3 Months: 72 to 82°F / 22 to 28°C
Charger Model:A14-100P1A
Voltage Output: 26.3 V
Power Rating: 100 W
Motor
Model DJI 6010
Propeller
Model DJI 2170
General
Operating Temperature 14 to 104°F / -10 to 40°C
Diagonal Wheelbase 44.6" / 1133 mm
Dimensions Propellers, Frame Arms, and GPS Mount Unfolded: 65.7 x 59.8 x 29.9" / 1668 x 1518 x 759 mm
Frame Arms and GPS Mount Folded: 25.2 x 22.9 x 24.5" / 640 x 582 x 623 mm
Weight Six TB47S Batteries: 20 lb / 9.1 kg
Six TB48S Batteries: 21.1 lb / 9.6 kg
Packaging Info
Package Weight 38.0 lb
Box Dimensions (LxWxH) 25.0 x 21.0 x 13.0"

 

In the Box
DJI Matrice 600 Hexacopter
  • Center Frame (Includes A3 and Lightbridge 2)
  • 6 x Frame Arm with Propeller Holder
  • 2 x Landing Gear Leg
  • Landing Skid
  • Left Retractable Module
  • Right Retractable Module
  • 2 x Retractable Module Mounting Rod
  • 2 x Retractable Module Bracket
  • Radio Controller (Transmitter)
  • 6 x TB47S Flight Battery
  • 2 x Charging Hub
  • 2 x Spring
  • 2 x Battery Charger
  • AC Power Cable for Charger
  • Micro-USB Cable
  • GPS-Compass Pro
  • GSP Mount
  • 6 x Arm Stopper
  • Landing Gear Stopper
  • 6 x Knob with Gasket
  • Screws Set
  • Double Sided Tape Set
  • Tape
  • Battery Stickers

Customer Reviews

Write Your Own Review

You're reviewing: DJI Matrice 600 Hexacopter

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.